Easter Bunny Silhouette

I've seen this craft floating around on Pinterest for a while, so I thought with Easter around the corner, I would give it a try. It was REALLY fun, and SUPER easy!! No fancy paper crafting tools!

What you'll need:

• At home printer
• Google Image Bunny/Egg Silhouette x2
• Glue/double sided tape
• Xxacto Knife/ Scissors
• Scrap paper strips/bought 
• Empty Frame
• Cardstock

An empty frame I found in my bedroom closet! Score!

Print two copies of the silhouettes. I highly recommend using cardstock!

I have a picture of what happens if you use regular computer paper at the end of this tutorial.

On ONE of the copies, use scissors or Xxacto knife to cut out the inside out. 

Be sure to cut AROUND the printed lines. They will show up in the end. 

Layout your scrap paper to see what order you'd like the colors to be in. 

You can even put the cut out on top to see if you like the combinations or not. 

Cut your scrap paper into how ever wide you want your strips. 

These are 3/4 of an inch, though I later changed it to 1/2 an inch. 

I used a ruler to make sure each strip was on even, as I laid them down. 

Using the double sided tape I laid each strip down, making sure the strip covers the bunny. 

You don't have to lay your strips even like this, I just happen to cut them the same length. 

As long as the bunny is covered, that's all that matters. 

I put double sided tape on the BACK of the cut out rabbit. 

Making sure to put it around the inside of the cut out. 

Because the rabbits are the same size, I can put the cut out rabbit on top of the paper and it will line up! Also. This is what happens when you only use computer paper. You can see the strips of paper! 

Even when I put it in the frame, you could still see the long strips through the rabbit. 

So, I redid it with cardstock, and it turned out MUCH better! 

Ta-Da! You did it!! How cute is that??

I hope you decide to try this craft! It was super fun!! 

Show me a picture of your project on my FB page!

I'm always around for trouble shooting too!

This is a link to my Facebook Page

I post Food blogs every Monday and Craft Blogs every Friday!! 

Paper Rosettes!

I recently came across an email as inspiration for today's blog!
Shutterfly didn't even realize what an inspiration they would be! 

As soon as I saw the email I thought "I haven't made those in forever!!" And knew they would be on my next Crafty Friday Blog. I learned some new things while making these, so learn from my mistakes, and I hope you make tons of these on your own!! 

This tutorial shows you how to make many different sizes!! 

Supplies:

• 12x12 paper (Cardstock works best for this! But paper CAN work) 
• Regular glue/ double sided tape
• Glue gun
• Decoration/ Embellishments
• Scoring tool ( See my previous BLOG for great scoring tool ideas! ) 
• In the tutorial I'm going to be using Ol' Trusty for my scoring needs. 
• I also just use a cheap Fiskars Paper Trimmer for my cutting needs. 

Using your favorite method of cutting paper, cut your 12x12 paper into 4 even strips.
(That's 3" each)
You should now have 4 strips of paper that measure 3" x 12"
Though, for this first rosette, we will only be using TWO of them. 

Next, we need to score the strips of paper in half inch increments. I'll show you what it looks like if you score them on the 1/4" line too, later. 

This is showing you to score them on the shorter side of the paper.
This picture is also showing you that I turned my score board on it's side for comfort. 

 

After you score at least two of them, start folding them back and forth accordion style.
This part takes the longest, I feel.
Though, I do think this part was easier with cardstock than with regular/ lightweight paper. 

You'll need to fold them in opposite directions. See how the one on the left, at the ends, the last flaps are pointed down? And the one on the right, the last flaps, are pointed up? This will make for a cleaner finish. If you didn't do it this way, just cut the last flap off on each side of one of them. 

That step is important because now we are going to connect them. 

I put double sided tape on the side with the red lines, and connected them together. 

If you used a glue that needs to dry, just get a paperclip or something to hold it together for a minute. 

Next bring the last two end together to make a complete loop.
Making it look sort of like a tank wheel. 

Now turn the wheel on it's side to make it look like a lamp shade. 

Gather the middle and press down, it should go down pretty easily! 

Look! It's "basically" done! 

Don't worry if it doesn't want to stay in that shape. Just place something on top of it until we get our glue and circle ready. 

I made a 2" circle out of an index card. 

You will need one for the back and one for the front.
The front circle doesn't have to be 2" because it will be seen. 

I'm using hot glue for this one because it dries faster.
I recommend only using a school glue if you are making smaller ones. 

I placed a plastic paperclip jar on top to help it stay down while everything dried. 

Ta-Da!! You did it!!
Using two of the 3"x 12" strips will get you this 7x7 circle. 

So, what would happen if we had scored it on the 1/4" lines earlier?
First of all, they take forever to fold, haha. 

Second, I had to cut the 3" strip in half (1.5" strip now)
To make it long enough to go around.
But look at the middle of that. The middle circle is huge!

We fix that by cutting out some of the length on the strip.
Then just reattach it like nothing happened. 

I could have taken more length off to get a tighter middle, but I decided this was fine. 

The giant pink rosette, is the size you get when you connect all four of the strips together.
The top circle on the pink one looks crazy because I used A LOT of regular school glue.

The large pink one was made with one whole 12x12 sheet of paper.

The medium was made with half a sheet of 12x12.

The smallest was made with one fourth of a 12x12 piece of paper. 

And this was just the Basics of making a paper rosette!
Just by changing the length, and width of the paper you can get hundreds of different sizes! 

About 5-6 years ago, I made a bunch, and used them as a decoration to have on my first sewing machine. 
(Sorry, I don't have a picture of that part close up, it was a long tine ago!)

(Photo courtesy of CatchMyParty.com )

You can even use them to make a pinned corsage!
Let me know if that's something you would like to learn how to make!
I know how to make that style AND the all ribbon kind!

Let me know if you make anything from my blogs! I would love to see them!
Just post them on The Crafty Goose FB page!
I'm always available for trouble shooting as well :)